| MAIN CHIP: SMARTLINK2801 |
|
|
| Newly-Designed Internal Data/Fax Modem with Line Speed of Data |
| Operation Up to 56kbps,Specifications＿Chipset: Intel |
| Data modulation rate: V.34bis, V.34+, ITU-T V.34, V.32bis,V.32, V.22bis, |
| V.22 and Bell 212A, ITU-T V.23, V.21 and Bell 103 |
| Transmission: 56000, 33600, 31200, 28800, 24000, 14400, 12000, 9600, |
| 7200, 4800, 1200, 1200/75 and 300bps |
|
| Computer interface: PCI bus and plug-and-play |
|
| Data compression: ITU-T V.42bis and MNP 5 |
|
| Error correction: ITU-T V.42 and MNP 2, 3, and 4 |
| ITU-T Group 3 compatible fax machines/modems |
|
| ITU-T V.17 V.29 V.27ter V.21 channel 2300 |
|
| 14400, 9600, 7200, 4800, 2400bps |
|
|
| Class 1 fax interface |
|
|
|
| Operation: full duplex |
|
|
|
| Commands: extended AT command set |
|
|
| Test modes: Analog, digital and remote digital loopback with self-test |
| Compatibility: Pentium 200(over) with MMX, CPU with PCI bus |
| Auto-dialing: Touch-tone and pulse dialing, auto dial and auto answer |
| Fully compliant with V.90, V.34 bis, V.32, V.32 and V.22 bis specifications |
| Compatible with Windows 95/98/2000/XP/ME/NT4.0 operating systems and most PCI bus compatible systems |
| Software upgradeable |
|
|
|
| Support variable sample rates via the SLOTREQ protocol and valid tag bits |
| Low latency GPIO data transfer |
|
|
| Support modem wake-up on ring from D3cold |
|
| Advanced power management support |
|
|
| PPMI (PCI: Power Management Interface) |
